Solreach All In One ESS(1000W+2009WH)
Solreach All In One ESS(1000W+2009WH)
-
BATTERY CELLS
-
INVERTER
-
WARRANTY
-
Rated AC Output Power
-
Low DC Warning Point
A-grade Gotion cells
CTVE (Shiyuan)
5 Years
1000 W
<=19%
Description
The Solreach All-in-One ESS 1000W + 2009Wh is a compact yet powerful portable energy storage system engineered for reliable residential backup, outdoor applications, and off-grid power. Combining a high-capacity 2009Wh LiFePO₄ battery, a 1000W pure sine wave inverter, and an intelligent Battery Management System (BMS) into a single plug-and-play unit, it delivers stable, safe, and efficient power whenever and wherever it's needed.
Advantages
High-Efficiency Energy Storage, Power Your Life with Greater Freedom
-
High-capacity battery provides reliable backup power for homes and small businesses
-
Store excess solar energy for higher self-consumption and lower energy costs
-
Plug-and-play compatibility with mainstream hybrid and off-grid inverters
Intelligent Energy Management, Smarter Control Every Day
-
Advanced BMS continuously monitors battery health for safe and stable operation
-
Real-time monitoring and remote management through a smart mobile app
-
Intelligent peak shaving and time-of-use optimization help reduce electricity bills automatically
Multiple protections,worry-free peace of mind
-
Comprehensive protection against overcharging, overcurrent, and overheating
-
48V low-voltage design for safer use
-
Fireproof and flame-retardant structure reduces risk of accidents
Specifications Parameter
Output Voltage Waveform
Rated AC Output Power
Rated AC Output Power
Rated AC Output Power
Rated AC Output Power
Output Voltage
Output Voltage
Output Voltage
Output Voltage
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Cut -off Voltage
Inverter/Charger
Rated AC Output Power
500 W
Output Voltage Waveform
Pure Sine Wave
Output Voltage
230VAC 50Hz
Low DC Warning Point
≤19%
Low DC Cut -off Voltage
2.9Vdc
LowDC Warning Return Voltage
>20%
Charging Power(Utility and solar together)
80OWMax
Bulk Charging Voltage
7.2Vdc
Float Charging Voltage
7.0Vdc
AC Input
Nominal Input Voltage
230Vac
Low Loss Voltage
90Vac+7
Low Loss Return Voltage
100Vac+7
High Loss Voltage
280Vac+7
High Loss Return Voltage
270Vac+7
Max.AC Input Voltage
280Vac+7
Nominal Input Frequency
45~65Hz
AC Charging Power
800W Max
Solar Input
Nominal PV Voltage
38Vdc
PV Array MPPT Voltage Range
13Vdc~55Vdc
Max.PV Array Open Circuit Voltage
56Vdc
Solar Charging Power
550W Max
DC Output
DC Output Power
5WMax
DC Output Socket
1pcs 5V1A USB charger
Display Function
LED Indicator
4pcs SOC indicators, 1 pcs working status indicators
Ambient
Noise(dB)
<40db(1meter)
Working Temperature
-10°C~+60°C
Humidity
5~95%(no condensation)
Sea Level(m)
≤2000
Dimension
xWxH(products size)
298x240x340mm
LxWxH(package size)
354x296x396mm
Weight(NW KG)
20.9Kg
Weiaht(Gw KG)
22.7Kg
Capacity
Nominal Battery Voltage
6.4Vdc
Typical Capacity
314Ah
Max.charge Current
160A
Max.Discharge Current
160A
Operation Voltage Range
5.8Vdc ~7.2Vdc
Operation Temperature
-10°C~+60°C
FAQs
1. What is the battery capacity and chemistry of the Solreach All-in-One ESS 1000W 2009Wh?
The Solreach All-in-One ESS has a rated capacity of 2009.6Wh with a nominal battery voltage of 6.4Vdc. It uses Grade-A Gotion LiFePO₄ (lithium iron phosphate) cells, which deliver over 6,000 charge-discharge cycles, minimal capacity degradation, and inherent thermal stability — making it the safest chemistry for commercial and off-grid energy storage deployments.
2. What is the inverter output specification and waveform type?
The built-in inverter is rated at 1000W continuous output with a pure sine wave waveform. Output voltage is 230VAC/50Hz, which is compatible with European, Asian, and African grid standards. The rated AC output power is 1000W, and the peak surge capacity supports motor-start loads. The inverter is supplied by CTVE (Shiyuan), a certified Chinese power electronics manufacturer.
3. What solar input specifications does this ESS support?
The Solreach ESS accepts a nominal solar panel input of 36Vdc with a maximum PV array MPPT voltage range of 130–450Vdc and an open-circuit voltage limit of 500V. Maximum solar charging power is 500W. The built-in MPPT solar charge controller supports a charging current of up to 160A, making it compatible with a wide range of residential and commercial PV array configurations.
4. Does the Solreach All-in-One ESS support AC grid charging and solar simultaneously?
Yes. The unit supports simultaneous AC grid charging and solar (PV) input. Combined maximum charging power reaches 800W when both sources are active together. The BMS intelligently manages both inputs to prioritize solar energy and protect the battery from overcharging, allowing users to maximize self-consumption and minimize grid dependency.
5. What safety protections are built into the BMS?
The Solreach All-in-One ESS includes a comprehensive multi-layer protection system: overcharge protection, over-discharge protection, overcurrent protection, short-circuit protection, and overtemperature protection. The low-voltage design (6.4V nominal cell voltage) provides an additional layer of electrical safety, and the flame-retardant enclosure structure reduces fire risk in both residential and commercial installations.
6. What are the physical dimensions, weight, and enclosure specifications?
The unit measures 298 × 240 × 340mm and weighs between 22 and 26kg depending on configuration. The enclosure is rated to IP protection standards suitable for indoor use. Operating temperature range is −10°C to +40°C. The unit can be stored at altitude up to 2,000m, making it deployable in highland off-grid markets such as East Africa and South America.
7. What OEM and white-label customization options are available for B2B buyers?
Solreach supports full OEM customization including brand logo and color on the enclosure, capacity configuration (Wh adjustments), inverter rating options, AC socket configuration by target market (EU/UK/US/AU), and custom packaging design. White-label orders are accepted with a minimum order quantity of 10 units for sample runs and scalable production from full container loads (FCL). OEM clients receive dedicated technical account management and co-branded documentation.
.jpg)
.png)