Solreach All In One ESS(5KW+8KWH)
Solreach All In One ESS(5KW+8KWH)
-
BATTERY CELLS
-
INVERTER
-
WARRANTY
-
Operating Protection
-
Operating Temperature
A-grade Gotion cells
CTVE (Shiyuan)
5 Years
IP54
-10°C~60°C
Description
The Solreach All-in-One ESS 5KW 8KWh is a high-performance energy storage system designed for residential backup, light commercial applications, and off-grid solar installations. Equipped with an 8KWh Grade-A Gotion LiFePO₄ battery and a 5KW pure sine wave inverter, it delivers reliable power for high-demand appliances, including air conditioners, pumps, and refrigeration equipment. The integrated 9000W MPPT solar charger, LCD display, WiFi monitoring, and IP-rated wall-mount design provide efficient energy management and simple installation.
Advantages
10KVA surge and dual switching modes for demanding loads
With a 10KVA surge capacity — double the rated 5KW output — this ESS handles high inrush current from motors, compressors, and pumps without tripping. The 10ms switching time in APP/UPS mode drops to 20ms in GEN mode, giving integrators the choice between zero-interruption UPS performance for IT and medical loads and cost-optimized generator-sync mode for industrial sites.
9000W MPPT input — the highest solar intake in the Solreach ESS range
The 5KW model's built-in MPPT charger accepts 27A at up to 9000W PV input — 4000W more than the 3.6KW model and 4500W more than the 1KW unit — across a 120–450VDC operating range with a 500V open-circuit ceiling. This enables direct connection of high-density solar arrays without additional BOS equipment, shortening installation time and reducing total system cost for OEM partners operating at scale.
93% peak efficiency with intelligent overload management
The inverter achieves 93% peak efficiency at 25.6VDC in battery mode — a benchmark figure for an all-in-one unit at this power class. Overload capacity in battery mode reaches 1 minute at 102–120% load and 10 seconds at 120–200% load, giving the system real-world resilience against transient spikes. This overload headroom is critical for B2B buyers supplying power to clinics, telecom base stations, and food storage facilities where load spikes are unpredictable.
Specifications Parameter
Output Voltage Waveform
Rated AC Output Power
Rated AC Output Power
Rated AC Output Power
Rated AC Output Power
Output Voltage
Output Voltage
Output Voltage
Output Voltage
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Warning Point
Low DC Cut -off Voltage
Surge Power (kVA)
Surge Power (kVA)
Voltage (VAC)
Voltage (VAC)
Voltage (VAC)
Power Factor (PF)
Power Factor (PF)
Rated Capacity (kW)
AC Input
Rated Input Voltage (VAC)
208/220/230/240; L+ N +PE
Voltage Range (VAC)
90~280+3 (normal mode); 170~280+3 (UPS mode)
Frequency (Hz)
50 / 60 (Auto Adaptive)
AC Output
Rated Capacity (kW)
5
Surge Power (kVA)
10
Voltage (VAC)
208/220/230/240
Power Factor (PF)
1
Frequency (Hz)
50/60Hz+0.1%
Switch Time (ms)
10 (APP/UPS mode)/20 (GEN mode)
Wave Form
Pure Sine Wave
Overload Capacity (Battery Mode)
1min@102%-120%load, 10s@120%-200% load
Charger (PV+AC)
Solar Charger Type
MPPT
Max PV Input current /power
27A/9000W
Operating Voltage Range (VDC)
120-450
Max PV Open Circuit Voltage (VDC)
500
Max PV Charge Voltage (A)
80
Max AC Charge Current (A)
160
Max. Charge Current (PV + AC)(A)
160
Battery
Nominal Battery Voltage
25.6VDC
Rated Energy
8KWh (0.2C,25°C)
Usable Enerqy (90% DOD)
7.2kwh
Max. Charge/Discharge Current
75A/150A
Operation Voltage Range
20vdc~29.2Vdc
Operation Temperature
-10°C~+60°C
Intertace
revea
LCD
communication
USB
Monitoring
WIF
General Protection
Operating Protection
IP54
Operating Temperature
-10°C~60°C
Relative Humidity
5% ~ 95% (Non-condensing)
Storage Temperature
-15°C~60°C
Max Operating Altitude
4000m (Derating above 1000m)
Dimension
LxWxH (products size, mm)
440*246*760mm
LxWxH (package size, mm)
520*436*890mm
Weight(NW Kg)
71.7Kg
Weight(GW Kg)
83Kg
常见问题
问：镀锡铜 PV1-F 4mm2 太阳能电缆中的 PV1-F 额定值与其他太阳能电缆额定值有何区别？
答：PV1-F 是用于光伏系统的特定等级，意味着电缆已经过测试和认证，符合太阳能电池板系统的国际标准。其他额定值则可能没有经过专门测试用于太阳能电池板系统。
问：如何判断镀锡铜 PV1-F 4mm2 太阳能电缆是否适合我的太阳能电池板系统？
答：您可以通过咨询持证电工或太阳能电池板系统制造商来确定镀锡铜 PV1-F 4mm2 太阳能电缆是否适合您的太阳能电池板系统。他们将为您推荐最适合您特定需求的电缆。
