top of page

Solreach All In One ESS(3.6KW+5KWH)

Solreach All In One ESS(3.6KW+5KWH)

  • BATTERY CELLS

  • INVERTER

  • WARRANTY

  • Solar Charger Type

  • Rated Capacity (kW)

A-grade Gotion cells

CTVE (Shiyuan)

5 Years 

MPPT

3.6

Description

The Solreach All-in-One ESS 3.6KW 5KWh is a compact energy storage solution designed for residential backup, off-grid, and commercial applications. Powered by Grade-A Gotion LiFePO₄ cells, it delivers 3.6KW pure sine wave output and 5KWh usable capacity for stable, reliable power. With fast 10ms UPS switching, 5.7KVA surge capacity, and support for 208–240VAC systems, it is ideal for homes, businesses, and OEM projects worldwide. Backed by a 5-year warranty and OEM customization, it offers a dependable solution for modern energy storage needs.

Advantages

5000W MPPT solar input with wide voltage range

The integrated MPPT controller accepts 40–450VDC PV input at up to 18A / 5000W, covering virtually all commercial panel configurations. This allows the 3.6KW ESS to reach full solar self-sufficiency with no separate charge controller — reducing system cost and installation complexity for OEM integrators and end users alike.

Grade-A LiFePO₄ cells with 6,000+ cycle life

Powered by Grade-A Gotion lithium iron phosphate cells, the 5KWh battery pack delivers over 6,000 charge-discharge cycles with minimal capacity degradation. The 48V architecture (25.6VDC nominal) enables high efficiency and stable discharge, while the multi-layer BMS protects against overcharge, overcurrent, and thermal runaway — the safest chemistry available for off-grid energy storage.

IP54 enclosure, WiFi monitoring, and full OEM flexibility

​The IP54-rated cabinet with 10ms transfer switching time and 5.7KVA surge capacity handles real-world residential and light commercial loads. WiFi-based remote monitoring, LCD display, and USB interface give installers and end users full system visibility. OEM clients can customize branding, capacity, socket type, and inverter spec — with FCL production support and 5-year warranty included.

Specifications Parameter

Output Voltage Waveform

Rated AC Output Power

Rated AC Output Power

Rated AC Output Power

Rated AC Output Power

Output Voltage

Output Voltage

Output Voltage

Output Voltage

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Cut -off Voltage

Surge Power (kVA)

Surge Power (kVA)

Voltage (VAC)

Voltage (VAC)

Voltage (VAC)

Power Factor (PF)

Power Factor (PF)

Rated Capacity (kW)

AC Input

Rated Input Voltage (VAC)

208/220/230/240; L+ N +PE

Voltage Range (VAC)

90~280+3 (normal mode); 170~280+3 (UPS mode)

Frequency (Hz)

50 / 60 (Auto Adaptive)

AC Output

Rated Capacity (kW)

3.6

Surge Power (kVA)

5.7

Voltage (VAC)

208/220/230/240

Power Factor (PF)

1

Frequency (Hz)

50/60Hz+0.1%

Switch Time (ms)

10

Wave Form

Pure Sine Wave

Overload Capacity (Battery Mode)

60s@102%~110%;10s@110%~130%;
3s@130%~150% ;0.2s@>150%;

Max. Efticiency(Battery Mode)

Solar Charger Type

MPPT

Max PV Input current /power

18A/ 5000W

Operating Voltage Range (VDC)

40-450

Max PV Open Circuit Voltage (VDC)

500

Max PV Charge Voltage (A)

100

Max AC Charge Current (A)

100

Max. Charge Current (PV + AC)(A)

100

Battery

Nominal Battery Voltage

25.6VDC

Rated Energy

5KWh (0.2C,25°C)

Usable Enerqy (90% DOD)

5kwh

Max. Charge/Discharge Current

75A/150A

Operation Voltage Range

20vdc~29.2Vdc

Operation Temperature

-10°C~+60°C

Intertace

revea

LCD

communication

USB

Monitoring

WIF

General Protection

Operating Protection

IP54

Operating Temperature

-10°C~60°C

Relative Humidity

5% ~ 95% (Non-condensing)

Storage Temperature

-15°C~60°C

Max Operating Altitude

4000m (Derating above 1000m)

Dimension

LxWxH (products size, mm)

440*246*760mm

LxWxH (package size, mm)

520*436*890mm

5-Energy Storage Systems Home Solutions.webp

常见问题

问:镀锡铜 PV1-F 4mm2 太阳能电缆中的 PV1-F 额定值与其他太阳能电缆额定值有何区别?

答:PV1-F 是用于光伏系统的特定等级,意味着电缆已经过测试和认证,符合太阳能电池板系统的国际标准。其他额定值则可能没有经过专门测试用于太阳能电池板系统。

 

问:如何判断镀锡铜 PV1-F 4mm2 太阳能电缆是否适合我的太阳能电池板系统?

答:您可以通过咨询持证电工或太阳能电池板系统制造商来确定镀锡铜 PV1-F 4mm2 太阳能电缆是否适合您的太阳能电池板系统。他们将为您推荐最适合您特定需求的电缆。

 

Related Products

Energy Storage Systems5K-8K.jpg

All In One ESS(5KW+8KWH)

All In One ESS(6.5KW+16KWH).jpg

All In One ESS(6.5KW+16KWH)

All In One ESS(12KW+32KWH).png

All In One ESS(12KW+32KWH)

bottom of page