top of page

Solreach All In One ESS(6.5KW+16KWH)

Solreach All In One ESS(6.5KW+16KWH)

  • BATTERY CELLS

  • INVERTER

  • WARRANTY

  • Operating Protection

  • Operating Temperature

A-grade Gotion cells

CTVE (Shiyuan)

5 Years 

IP54

-10°C~60°C

Description

The Solreach All-in-One ESS 6.5KW 16KWh is the highest-capacity model in the Solreach lineup, built for energy-intensive residential, commercial, and off-grid installations where one or two days of full autonomy is required. Operating on a true 51.2VDC (nominal) architecture — the only 48V-class unit in the Solreach range — it delivers 6KW rated continuous AC output, a 12KVA surge ceiling, and 94% peak inverter efficiency. The 16KWh LiFePO₄ battery provides 14.4KWh of usable energy at 90% DoD. 

Advantages

16KWh capacity — full-day autonomy for heavy users

  • 14.4KWh usable at 90% DoD — the highest in the Solreach ESS range, double the 5KW model

  • Supports 2–3 days of autonomy for a typical household on 2–3KWh/day consumption

  • 150A / 150A symmetric charge-discharge current enables fast cycle turnaround for commercial deployments

51.2V true 48V architecture — higher efficiency, lower cable loss

  • 51.2VDC nominal (40–58.4VDC range) — operates at 2× the voltage of the 25.6V models, halving DC cable current and reducing resistive loss

  • Peak inverter efficiency reaches 94%@48VDC — 1% higher than the 5KW model's 93%@25.6V

  • Industry-standard 48V bus makes it natively compatible with third-party BMS, EV chargers, and DC-coupled solar arrays

12KVA surge — powers the full commercial load spectrum

  • 12KVA surge (2× rated output) — 20% higher than the 5KW model's 10KVA, enabling simultaneous start of multiple motor loads

  • Overload tolerance: 1 min @ 102–120% load; 10 s @ 120–200% load — matches the demands of clinic and cold-chain logistics equipment

  • Pure sine wave output at 208/220/230/240VAC ensures compatibility with sensitive medical, refrigeration, and telecom equipment

Specifications Parameter

Output Voltage Waveform

Rated AC Output Power

Rated AC Output Power

Rated AC Output Power

Rated AC Output Power

Output Voltage

Output Voltage

Output Voltage

Output Voltage

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Warning Point

Low DC Cut -off Voltage

Surge Power (kVA)

Surge Power (kVA)

Voltage (VAC)

Voltage (VAC)

Voltage (VAC)

Power Factor (PF)

Power Factor (PF)

Rated Capacity (kW)

AC Input

Rated Input Voltage (VAC)

208/220/230/240; L+ N +PE

Voltage Range (VAC)

90~280+3 (normal mode); 170~280+3 (UPS mode)

Frequency (Hz)

50 / 60 (Auto Adaptive)

AC Output

Rated Capacity (kW)

6

Surge Power (kVA)

12

Voltage (VAC)

208/220/230/240

Power Factor (PF)

1

Frequency (Hz)

50/60Hz+0.1%

Switch Time (ms)

10

Wave Form

Pure Sine Wave

Overload Capacity (Battery Mode)

1min@102%-120%load, 10s@120%-200% load

Charger (PV+AC)

Solar Charger Type

MPPT

Max PV Input current /power

27A/9000W

Operating Voltage Range (VDC)

80-450

Max PV Open Circuit Voltage (VDC)

500

Max PV Charge Voltage (A)

120

Max AC Charge Current (A)

120

Max. Charge Current (PV + AC)(A)

120

Battery

Nominal Battery Voltage

51.2VDC

Rated Energy

16KWh (0.5C,25°C)

Usable Enerqy (90% DOD)

14.4kwh

Max. Charge/Discharge Current

150A/150A

Operation Voltage Range

40vdc~58.4Vdc

Operation Temperature

-10°C~+60°C

Intertace

revea

LCD

communication

USB

Monitoring

WIF

General Protection

Operating Protection

IP54

Operating Temperature

-10°C~60°C

Relative Humidity

5% ~ 95% (Non-condensing)

Storage Temperature

-15°C~60°C

Max Operating Altitude

4000m (Derating above 1000m)

Dimension

LxWxH (products size, mm)

550*246*1180mm

LxWxH (package size, mm)

630*420*1264mm

Weight(NW Kg)

168Kg

Weight(GW Kg)

192Kg

Benefits and the Impact of Battery Energy Storage Systems.webp

常见问题

问:镀锡铜 PV1-F 4mm2 太阳能电缆中的 PV1-F 额定值与其他太阳能电缆额定值有何区别?

答:PV1-F 是用于光伏系统的特定等级,意味着电缆已经过测试和认证,符合太阳能电池板系统的国际标准。其他额定值则可能没有经过专门测试用于太阳能电池板系统。

 

问:如何判断镀锡铜 PV1-F 4mm2 太阳能电缆是否适合我的太阳能电池板系统?

答:您可以通过咨询持证电工或太阳能电池板系统制造商来确定镀锡铜 PV1-F 4mm2 太阳能电缆是否适合您的太阳能电池板系统。他们将为您推荐最适合您特定需求的电缆。

 

Related Products

Energy Storage Systems 500W+1000WH_edited.png

All In One ESS(500W+1000WH)

Energy Storage Systems 500W+1000WH_edited.png

All In One ESS(1000W+2009WH)

Energy Storage Systems3_edited_edited.pn
Energy Storage Systems3_edited_edited.pn

All In One ESS(3.6KW+5KWH)

bottom of page